Maintaining the cleanliness of a pool takes more than just skimming through the leaves and other debris floating around.
To maintain the cleanliness of your pool clean and make it safe to swim on, you must have pool filters.
Essentially, the purpose of the pool filter is to keep the water clear by removing debris, dirt, and bugs in the pool.
With a well-maintained pool filter, a swimming pool can operate properly.
Without a pool filter, dirt and debris will not only enter the swimming pool but also stay there. Without adequate filtration, infections and the potential for algae growth in the water may occur.
In order to maintain healthy pool water, the filter also helps with water circulation. Circulation assists in the dispersal of chemicals used in swimming pools that eliminate bacteria and stop them from growing.
Moreover, while pool filters are designed to clean your pools, they are not designed to clean themselves. Hence, it is your job as a pool owner to keep them clean and working.
But how constantly should you clean your pool filter? Should you clean it as much as you do with the pool through skimming? No.
All pool filters require sporadic cleaning depending on the type and volume of use.
As a pool owner, you only need to clean it once in a while, not constantly. Cleaning the filter more frequently than is recommended can actually meddle with the filtration process.
Minimal dirt on the pool filter seems to help capture other particles, which also removes debris from the water, making a clean pool filter less effective than one with some dirt in it.
To maintain its condition, the pool needs to be cleaned frequently. However, always remember to keep the filter clean.
Examining and cleaning the filter is also a smart idea after a severe storm. The faster you can clean the filter after a severe storm, the better.
Different Types of Pool Filters
Sand Filters
The most affordable and portable filters for in-ground pools are sand filters. They are also the earliest kind of filter that is still in use.
A compartment enclosing sand of a specific size is filled with pool water using a pump. The pool water enters the sand, passes through it, and exits the other side. The sand filter traps debris, like leaves and branches, as it moves with the water.
Should you encounter filter problems, pool repair Frisco residents love can be called. They can fix your sand filter for you.
Cartridge Filter
The water is pushed into a tank. How do these filters work? The larger litter is gathered by the skimmer, while the smaller litter is gathered by the secondary basket.
With a cartridge pool filter, the final filtration happens when the water is filtered through polyester filters in order to remove any last bits of dirt.
Compared to sand filters, cartridge filters can filter out more dirt and smaller dirt particles, but they are less widely used due to their higher cost.
DE Filters
Diatomaceous earth is used as a filter media in DE filters. Diatomaceous Earth, a type of filter powder, is used as the filtering layer.
The DE can filter far more finely if compared to a sand filter because it is much finer than sand. The water is better purified because it can capture much smaller and finer particles. This can improve water clarity and create a pool that is safe to swim in.
Pool Filters Frequently Asked Questions
A. How to clean the pool filter?
Identify what type of pool filter you have. A straightforward online search about your filter can lead you to proper pool filter cleaning tips.
If you want to, you can just leave the job to Watertex Pools. They know what to do.
B. How long should I keep the pool filter running?
Your swimming pool filtering system should ideally be running for 8 to 10 hours per day.
The filter facilitates the chemical movement through the water, so when adding chemicals to the water, ensure that the filter is running.
C. Which type of filter should I get?
The filter you choose will depend on how you intend to maintain and use your pool. The best option if you want low maintenance is a cartridge.
